Basic Functions
The MUT-III can be utilized for all types of vehicle electronic
control units (incorporating the
diagnostics function).
The MUT-III reads each diagnostic code and displays it as a name.
Using serial communications, the MUT-III reads the RAM data (data
list) within the ECU that is
required for servicing, thus enabling the display of both graphs
and numeric values converted to
physical quantities. (Only for ECUs that support serial
communications.)
The MUT-III can forcibly drive or forcibly stop the actuators
required for servicing. (Only for
ECUs that support serial communications.)
Using its voltage measuring function, the MUT-III can measure DC
voltage ranging from +/-40.
Using its resistance measuring function, the MUT-III can measure
resistance ranging from 0 ~
100kOhm.
V.C.I. Function
Fault Diagnosis
The V.C.I. can perform fault diagnosis by receiving
commands from a PC and communicating with a vehicle
ECU.
The buttons on the V.C.I. will not function while it is connected
to a PC.
[Start-up Screen]
The screen to the left will be displayed when the USB
cable is connected to the main unit.
The direction of signal flow between the PC and the V.C.I. will be
indicated by an arrow, such as [P->V] or [P<-V].
Measurement Functions: Voltmeter / Ohmmeter
The V.C.I. can read voltage / resistance values that are applied to
its trigger port, displaying these
numeric values on its LCD screen.
Diagnostic software version: FMSi-E06-1
